---

Unlocking WiFi Devices (MF673 and MF25 B35)

Step 1: Prepare Tools and Requirements

1. USB Cable: Ensure you have the correct USB cable to connect the device to your computer.
2. Drivers: Install the appropriate drivers for your device so your computer recognizes it.
3. Firmware/Unlock Tool: Obtain the correct firmware or an unlocking tool specific to your device model (search online or from official sources).

Step 2: Boot Device into Fastboot Mode

1. Power Off the device completely.
2. Press and hold the Reset button (or a specific button combination for your model, often found under the back cover or a pinhole), while connecting it to your computer.
3. If the device supports Fastboot, the Fastboot mode will appear.

Step 3: Use Fastboot to Unlock

1. Open a command prompt/terminal on your computer where ADB and Fastboot are installed.
2. Verify that the device is connected by typing: fastboot devices You should see the device listed. If not, reinstall the drivers and check the connection.
3. To unlock the device (if supported), type: fastboot oem unlock This command may vary depending on your device’s firmware.

Step 4: Flash Firmware

If unlocking requires custom firmware, you can flash it using Fastboot:

1. Download the required firmware file.

1. Flash it with this command: fastboot flash firmware firmware.img Replace firmware.img with the actual file name.

Step 5: Reboot and Configure

1. Once the process is complete, reboot the device: fastboot reboot
2. Insert a new SIM card or configure the network settings for your desired carrier.

---

Alternative Method: Using Direct File and Tosser Shot in PIN

watch this Video Completely and dont miss any Point of this Video:

Please Like and Subscribe my channel for more engaging content like this THANKS.